KIMFLY M11 FLASH FILE SP7731C 6.0 SPD TOOLS SUPPORTED PAC FILE 100% TESTED BY FOYSAL TELECOM

KIMFLY M11 FLASH FILE SP7731C 6.0 SPD TOOLS SUPPORTED PAC FILE 100% TESTED BY FOYSAL TELECOM

KIMFLY M11 FLASH FILE PAC FIRMWARE SC7731 TESTED
KIMFLY M11 CM2 FIRMWARE OR OFFICIAL TOOLS SUPPORT PAC FILE
KIMFLY M11 LOGO HANG FIX TESTED UPDATE FIRMWARE
KIMFLY M11 NO DEAD RICK 100% TESTED STOCK ROM

SP7731CEB_sp7731c_1h10_32v4_6.0_MRA58K_release-keys_M11 CM2 FILE

SP7731CEB_sp7731c_1h10_32v4_6.0_MRA58K_release-keys_M11 PAC

Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_1h10_32v4_oversea
Model Brand : kimfly
Model Device: sp7731c_1h10_32v4
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : MRA58K release-keys
Model Ext   : M11

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : logo2.bin
[Read Ok] : logo3.bin
[Read Ok] : logo4.bin
[Read Ok] : logo5.bin
[Read Ok] : logo6.bin
[Read Ok] : logo7.bin
[Read Ok] : logo8.bin
[Read Ok] : logo9.bin
[Read Ok] : logo10.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1646 MiB
Saved to : C:\Users\Ft\Desktop\SP7731CEB_sp7731c_1h10_32v4_6.0_MRA58K_release-keys_M11\
Done!

Elapsed: 00:05:32

Reconnect Power/Cable!

KIMFLY M11 FLASH FILE SP7731C 6.0 SPD TOOLS SUPPORTED PAC FILE 100% TESTED BY FOYSAL TELECOM